Please use this identifier to cite or link to this item: https://idr.l2.nitk.ac.in/jspui/handle/123456789/13980
Title: Dataset on flank wear, cutting force and cutting temperature assessment of austenitic stainless steel AISI316 under dry, wet and cryogenic during face milling operation
Authors: Rao K.M.C.
Malghan R.L.
Herbert M.A.
Rao S.S.
Issue Date: 2019
Citation: Data in Brief, 2019, Vol.26, , pp.-
Abstract: The contemporaneous examination focuses on the impact of spindle speed as well as an eco-pleasing cooling strategy in the midst of processing of AISI316. Investigations were executed at three different machining approaches viz. dry, wet and cryogenic (LN2) using cemented carbide inserts. Water dissolvable oil was used as a cutting fluid for flood cooling approach. The workpiece was processed under three distinctive cutting speeds i.e. 1000, 2000 and 3000 rpm however feed rate and depth of cut were kept consistent at 450 mm/min and 1mm separately. An exhaustive investigation on the cooling impacts of LN2 technique on a segment of the significant machinability perspective, for instance, cutting force (Fx), insert wear, surface quality and processing temperature is delineated. The beforehand specified processing responses were documented and contrasted all together to demonstrate the reasonableness and achievability of LN2 approach in examination with dry and wet machining methodology. The outcomes accomplished in the midst of the examination obviously settled the commonness of realizing LN2 for achieving upgraded machinability inside a predetermined scope of process parameters. © 2019 The Author(s)
URI: 10.1016/j.dib.2019.104389
http://idr.nitk.ac.in/jspui/handle/123456789/13980
Appears in Collections:5. Miscellaneous Publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.