Please use this identifier to cite or link to this item:
https://idr.l2.nitk.ac.in/jspui/handle/123456789/8288
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Rao, Agari, S. | - |
dc.contributor.author | Mukunda, P.G. | - |
dc.contributor.author | Rao, S.S. | - |
dc.contributor.author | Sudhakar, K.G. | - |
dc.date.accessioned | 2020-03-30T10:18:21Z | - |
dc.date.available | 2020-03-30T10:18:21Z | - |
dc.date.issued | 2011 | - |
dc.identifier.citation | JOM, 2011, Vol.63, 5, pp.25-29 | en_US |
dc.identifier.uri | http://idr.nitk.ac.in/jspui/handle/123456789/8288 | - |
dc.description.abstract | True centrifugal casting is a standard casting technique for the manufacture of hollow, intricate and sound castings without the use of cores. The molten metal or alloy poured into the rotating mold forms a hollow casting as the centrifugal forces lift the liquid along the mold inner surface. When a mold is rotated at low and very high speeds defects are found in the final castings. Obtaining the critical speed for sound castings should not be a matter of guess or based on experience. The defects in the casting are mainly due to the behavior of the molten metal during the teeming and solidification process. Motion of molten metal at various speeds and its effect during casting are addressed in this paper. Eutectic Al-12Si alloy is taken as an experiment fluid and its performance during various rotational speeds is discussed. | en_US |
dc.title | Inference of optimal speed for sound centrifugal casting of Al-12Si alloys | en_US |
dc.type | Book chapter | en_US |
Appears in Collections: | 2. Conference Papers |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.