Please use this identifier to cite or link to this item: https://idr.l2.nitk.ac.in/jspui/handle/123456789/7860
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRamesh, S.
dc.contributor.authorShivananda, Nayaka, H.
dc.date.accessioned2020-03-30T10:02:57Z-
dc.date.available2020-03-30T10:02:57Z-
dc.date.issued2019
dc.identifier.citationMaterials Science Forum, 2019, Vol.969 MSF, , pp.392-397en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/7860-
dc.description.abstractCopper-Titanium alloy was subjected to multi axial forging (MAF) at cryogenic temperature. Microstructure evolution was observed using optical microscope (OM). After 9 pass of MAF, grain size reduced to 2 �m. As number of MAF pass increases, hardness of the sample increased, due to strain hardening effect. Dry sliding wear test was performed on as-received and MAF processed samples using pin on disc wear machine. Tests were performed at 30 N and 40 N loads at 3 m/s constant speed and at 1000 m and 2000 m, sliding distance. Scanning Electron Microscope (SEM) and EDS was used to analyze the worn-out surface of the specimen. Wear mass loss of MAF processed sample reduced, with increased number of MAF passes. Frictional Coefficient (COF) reduced with increase in MAF passes and improved with increase in load, because of increase in contact area between sample and disc. � 2019 Trans Tech Publications Ltd, Switzerland.en_US
dc.titleEffect of multiaxial cryoforging on wear properties of cu-1.5%ti alloyen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.