Please use this identifier to cite or link to this item: https://idr.l2.nitk.ac.in/jspui/handle/123456789/16433
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRao C.M.
dc.contributor.authorSachin B.
dc.contributor.authorRao S.S.
dc.contributor.authorHerbert M.A.
dc.date.accessioned2021-05-05T10:30:28Z-
dc.date.available2021-05-05T10:30:28Z-
dc.date.issued2021
dc.identifier.citationTribology International Vol. 153 , , p. -en_US
dc.identifier.urihttps://doi.org/10.1016/j.triboint.2020.106619
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/16433-
dc.description.abstractA novel cutting tool development with the micro-hole textures on the flank and rake face of the cutting inserts helps in the reduction of tribological properties. The machining of Ti–6Al–4V alloy leads to some challenges during machining namely higher cutting temperature, and rapid tool wear. In this research, a comparison study has been performed with the new cutting tool inserts with surface modification such as Polycrystalline Cubic Boron Nitride (PCBN) and Polycrystalline Diamond (PCD) inserts for high-speed machining of Ti–6Al–4V alloy. The influence of the micro-hole textured insert on the machining of the Ti–6Al–4V alloy was investigated with the Minimum Quantity Lubrication (MQL) method. Compared to modified PCBN inserts, modified PCD inserts showed better results in all the performance characteristics. © 2020 Elsevier Ltden_US
dc.titleMinimum Quantity Lubrication through the micro-hole textured PCD and PCBN inserts in the machining of the Ti–6Al–4V alloyen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.