Please use this identifier to cite or link to this item: https://idr.l2.nitk.ac.in/jspui/handle/123456789/12484
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSarvade, P.G.
dc.contributor.authorNayak, S.
dc.date.accessioned2020-03-31T08:39:23Z-
dc.date.available2020-03-31T08:39:23Z-
dc.date.issued2011
dc.identifier.citationInternational Journal of Earth Sciences and Engineering, 2011, Vol.4, 5, pp.266-273en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/12484-
dc.description.abstractThe infrastructural development activities due to rapid urbanization, low lying agricultural and marshy lands in and around Mangalore (India) are being converted into estates with locally available lithomargic clay. These filled up areas pose problems of low bearing capacity as well as excessive settlements. As long as this soil is confined and dry, there is a very little or no problem, when it comes in contact with water, it loses its strength. The engineering properties of this soil are enhanced by the addition of additives (cement, quarry dust and quarry dust +cement). In the present study the microfabric and mineralogical aspects of the stabilized lithomargic clay is studied using Scanning Electron Microscope (SEM) and X-ray diffractometer (XRD). The XRD analysis of lithomargic clay stabilized with cement, revealed the formation ettringite, CSH and CAH. The SEM analysis revealed change in the soil structure due to the addition of cement and quarry dust. 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.en_US
dc.titleMicrofabric and mineralogical studies using sem and xrd on the lithomargic clay stabilized with cement and quarry dusten_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.