Please use this identifier to cite or link to this item:
https://idr.l2.nitk.ac.in/jspui/handle/123456789/10602Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Srinivasan, K. | - |
| dc.contributor.author | Venugopal, P. | - |
| dc.date.accessioned | 2020-03-31T08:22:48Z | - |
| dc.date.available | 2020-03-31T08:22:48Z | - |
| dc.date.issued | 2004 | - |
| dc.identifier.citation | Journal of Materials Processing Technology, 2004, Vol.153-154, 43891, pp.765-770 | en_US |
| dc.identifier.uri | http://idr.nitk.ac.in/jspui/handle/123456789/10602 | - |
| dc.description.abstract | Open die extrusion (ODE) has been done on AISI 1020 steel, commercial purity aluminium and commercial purity titanium, in both direct and inverted modes. It was found that inverted extrusion requires lesser forces than direct extrusion. Limit strains are more for the former than for the later as measured experimentally and as calculated theoretically. Theoretical limit strains are lesser than experimental ones in both the case of rods and tubes. ODE is only for shorter components due to unsupported billet and interference from buckling. It is also only for smaller strains due to interference from upsetting of unsupported billet above the die rather than extrusion through the die. 2004 Elsevier B.V. All rights reserved. | en_US |
| dc.title | Direct and inverted open die extrusion (ODE) of rods and tubes | en_US |
| dc.type | Article | en_US |
| Appears in Collections: | 1. Journal Articles | |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.