Please use this identifier to cite or link to this item: https://idr.l2.nitk.ac.in/jspui/handle/123456789/10057
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSoni, H.
dc.contributor.authorNarendranath, S.
dc.contributor.authorRamesh, M.R.
dc.date.accessioned2020-03-31T08:18:33Z-
dc.date.available2020-03-31T08:18:33Z-
dc.date.issued2017
dc.identifier.citationAdvances in Modelling and Analysis A, 2017, Vol.54, 3, pp.435-443en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/10057-
dc.description.abstractPresent study exhibits the comparison between experimental and predicted values. Where response surface method (RSM) and artificial neural network (ANN) were used as predictor for the prediction of wire electro discharge machining (WEDM) responses such as the material removal rate (MRR) and surface roughness (SR) during the machining of Ti50Ni40Co10 shape memory alloy. It has been noticed from the literature survey that pulse on time and servo voltage are most important process parameters for the machining of TiNiCo shape memory alloy, hence there are five levels of these process parameters were chosen for the present study. For the present study selected alloy has been developed through vacuum arc melting and L-25 orthogonal array has been created by using Taguchi design of experiment (DOE) for experimental plan. During the present study ANN predicted values have been found to very close to experimental values compare to RSM predicted values, hence it can be say that ANN predictor gives more accurate values compare to RSM predicted values. 2017 AMSE Press. All rights reserved.en_US
dc.titleANN and RSM modeling methods for predicting material removal rate and surface roughness during WEDM of Ti50Ni40Co10 shape memory alloyen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.